How Do You Start a Boiler?

There are a lot of steps involved in the boiler startup procedure. These include:

• First, you have to turn on the burner switch and make sure the pilot lights appropriately. 
• Next, you should make sure the boiler vent and drain are open. This is important for bleeding any air that may be present. 
• Following this, you have to open the main steam stop valves. 
• After the pressure in the boiler reaches between 10 and 15 PSI, close the vent.
• Now, test the low-water cutoff system. Secure the boiler feed and let the boiler steam off naturally. 
• When the pressure reaches between 75 and 85 percent of the system line pressure, open the non-return valve.
• Test the safety valve to make sure it is operating appropriately. 
• Increase the boiler pressure gradually, allowing the boiler to acclimate to the current environment.
• Finally, you should close the drain and verify that all controls are working properly. 

If you experience any issues during this process, have an internal expert examine the system. Might we suggest McKenna Boiler? We offer same-day service where we send our boiler technician to physically examine your boiler system. 

How Do You Shut Down a Boiler?

Once you are done working with your boiler, you need to make sure you shut it down appropriately. A few important steps you have to follow include: 

• First, shutting off fuel that powers the burner. 
• Next, you should open the superheater outlet drain valve if your boiler system has one. 
• After this, you should close the main steam stop valves. 
• Open all drains on the boiler system. 
• Finally, you should shut down the main boiler feed system to complete the process. 

Once you have completed the steps, your boiler system should be powered off appropriately. 

How Does This Improve Boiler Performance?

It is true that it will take you a few minutes to go through these steps; however, you have to make sure you work the steps appropriately in order to properly take care of your boiler. If you try to rush through the steps, you could place a lot of stress on the internal components of the boiler. Additionally, keeping fluids and gasses trapped in the pipes for extended periods of time can cause severe damage to the pipes. As a result, you may end up with serious issues that could lead to a major repair bill. Furthermore, this could also create a significant safety hazard. These factors prove even more reason to make sure you go through the start-up and shutdown boiler processes appropriately. 

Contact McKenna Boiler for Professional Boiler Services

Your boiler system has a lot of internal components that require routine maintenance to ensure perfect harmony. If you do not start or shut down your boiler correctly, you put your boiler system and facility at major risk for complete failure. At McKenna Boiler, we serve as reliable boiler professionals who can maximize the operational efficiency of your boiler. We handle everything from boiler installation to boiler maintenance and even boiler repairs. Contact us us today to learn more about our services.

The post Boiler Best Practices: Safe Start-Up and Shut Down for a Hot System appeared first on McKenna Boiler.

How Much Money Are You Spending on Repairs?

First, you should take a closer look at how much money you are spending on repairs. Do you notice that your repair bills are going up? Do you seem to have to call boiler maintenance services for an acute concern multiple times per month? If so, you may want to stop sinking money into repairs. Even though it may be expensive to replace your boiler, it is going to be more expensive to continue to repair your old one. If the cost of repairs is rapidly growing, it’s time to install a new boiler for your business. 

What Is Your Current Energy Bill?

Next, take a closer look at your current energy bill. How does this energy bill compare to prior ones? As your boiler gets older, it is not going to be as efficient as it was before. As a result, you will have to spend more money to produce the same amount of energy from your boiler. If you find that your current utility bills far exceed what they were in prior months, this could be a sign that your boiler is beginning to fail. It may be time to replace it.

How Old Is Your Boiler?

Of course, you should also consider how old your boiler is. Boilers last for varying numbers of years depending on when they were made, what purpose they serve, and how well they have been maintained. If you have had the same commercial boiler for a couple of decades, it may be time to replace it. Take a look at the age of your boiler and compare this to the average lifespan of that specific model. If you are approaching this number, it may be time to replace it. 

Can You Save Money on a New Boiler Installation?

Of course, you may be wondering if installing a new boiler is actually going to save you money. A few factors to consider include:

• Your plan on intended use 
• The efficiency of the new boiler 
• The current rates of your utilities 

There is a great chance a new boiler is going to save you money. The only question is how much you are going to save. A few factors that will determine the right boiler for your business include: 

• The industry in which you operate 
• How much fuel do you use annually 
• How much heat output you require 

In order to properly assess these factors as you look at various commercial and industrial boilers, you need to work with trained professionals. That is where our team of friendly experts can assist you. 

Rely on the Team from McKenna Boiler for Boiler Installation

If you are looking for a team that can help you get the most out of your commercial boiler, we are here to help you. We are McKenna Boiler, and we have an unparalleled level of experience when it comes to commercial boilers of all shapes and sizes. We can help you address a broken boiler with boiler rentals or even a new boiler installation. We can help you find the perfect boiler for your business as well. Contact us today to speak to a member of our team!

The post 4 Questions to Ask Before New Boiler Installation appeared first on McKenna Boiler.

Make Sure to Keep the Boiler Room Clean

One of the first safety tips everyone should follow is to keep the boiler room as clean as possible. Even though this might sound simple, a lot of people forget about it. Unfortunately, a lot of companies use their boiler room as a place to store just about everything. If you clutter the room, the air circulation in the room will suffer. As a result, carbon monoxide (CO2) will be produced. Furthermore, the fuel in your building might not combust appropriately.

In order to prevent this from happening, keep the boiler room as clean as possible. If you see items on the floor, move them unless they absolutely have to be there. The only purpose of that room should be the storage of your boiler.

Additionally, the boiler system should be regularly cleaned and dusted to prevent rust from forming at critical points on the pipes. Establish a daily routine for a complete wipe down of the boiler to ensure that the boiler is properly cleaned. This will help you catch any leaks or breaks early on rather than later when bigger issues arise. Any time you see an issue, big or small, you should seek professional boiler mechanical services to address your concerns.

Invest in Continuing Education for the Boiler System

There are numerous types of steam boilers and hot water boilers out there. They are not the same. Therefore, anyone who is going to be working with the boiler on a regular basis has to be trained to use it appropriately. One of the most common reasons why people have issues with their boilers is that they simply don’t know how to operate this precious machinery. 

If you want your boiler to run well, make sure everyone who uses it has been properly trained to do so. All users have to know how to interact with new controls. If the boiler gets an upgrade, make sure everyone understands what the upgrade means for the boiler’s daily operations. You can rely on our boiler technicians at McKenna Boiler who will provide in-depth training and information about all types of boilers to help train your employees. 

Have Your Boiler Inspected and Maintained by a Trained Professional

Finally, you should stay up to date on the maintenance of your boiler. This means getting it inspected regularly. You may think that if nothing is wrong with your boiler, you don’t need to do anything to fix it. Though this may be the case, taking care of your boiler should focus on preventative measures rather than troubleshooting noticeable concerns. That’s where boiler mechanical services can help your business operations by handling the harder maintenance tasks that require a trained eye to solve these problems.

You may think that you can do this on your own by simply reading the manual. This is not the case. In order to properly service a boiler, you need to have the right training. Therefore, rely on trained professionals who are familiar with the inner workings of your boiler. They have been trained to spot the smallest of errors. That way, you can identify and fix issues with your boiler before they spiral out of hand. If you get your boiler maintained on time, every time, it will take care of you.

Contact McKenna Boiler Today for Boiler Maintenance Services

If you are looking for boiler mechanical services or boiler maintenance services, then look no further than McKenna Boiler. At McKenna Boiler, we have the training and expertise necessary to help you take proper care of your boiler. If you want to keep your efficiency high and your bills low, rely on us to service your boiler regularly. Contact us today to learn more about how we can help you with your boiler!

The post 3 Boiler Safety Tips Your Business Must Follow appeared first on McKenna Boiler.

Treat the Water in Your Industrial Boiler Effectively

Make sure that you are treating the water periodically. If you do not treat your water properly, this can damage the equipment in your boiler. Over time, this can significantly reduce the lifespan of your boiler system. Furthermore, dirty water or hard water can also lead to critical failures in the boiler itself, posing serious safety threats. 

To protect your boiler, implement cleaning tasks to prevent the buildup of hard scale. There are numerous water treatment solutions available. To learn more about how you can treat the water that goes through the boiler, reach out to our trained professionals at McKenna Boiler today. 

Rotate the Lead Boiler

If you are looking for a boiler that will provide you with a longer lifespan, go with a modular boiler system. Then, make sure that you rotate your lead boiler. A modular boiler system will help you rotate which boiler is doing the most work. That way, you don’t burn out a single boiler too quickly. Boiler sequencing is one of the biggest trends in the industry and can reduce the wear and tear on the boilers in operation. Work with trained professionals to learn more about how modular boilers and boiler sequencing can help you get more years out of your boiler system. 

Look For Boilers with Advanced Monitoring and Diagnostic Controls

You should also opt for boilers that provide you with an added level of control. You need to make sure that you are monitoring your boiler closely. Of course, you have a lot to do during the day, so look for a boiler that does this on its own. With an advanced diagnostic system, you can monitor your boiler in real-time. Then, if you detect issues, you can address them appropriately. Make sure that you partner with trained professionals who can help you understand exactly what information is coming from your boiler’s monitoring and diagnostic system. 

Schedule Boiler Inspections Often

Finally, if you want to get as many years as possible out of your boiler, you need to get it inspected on time. You may feel like nothing is wrong with your boiler; however, not every boiler issue is going to be obvious. That’s why we recommend receiving routine maintenance services from boiler professionals who can detect the smallest details that could potentially lead to more serious problems. Oftentimes, when these minute details are overlooked, they tend to snowball into something larger and more costly. Instead, catch these problems as early as possible and protect the lifespan of your boiler. Inspect your boiler once per year with the help of trained professionals. That is where we can help you. 

Contact McKenna Boiler Today for Boiler Maintenance Services

We know that you have spent a lot of money on your industrial boiler. We want you to get as many years as possible out of your industrial boiler system. At McKenna Boiler, we have the tools, training, and expertise necessary to help you maximize the efficiency of your boiler with professional boiler mechanical services. Contact us today to learn more about how we can help you! 

The post 4 Tips to Increase The Industrial Boiler Lifespan appeared first on McKenna Boiler.